Error Codes
Error Code 353
Error Code 353: NO MESSAGE TO RESEND
Resolution:
1. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.
2. Perform several test dispenses. If the ATM operates normally while performing a test dispense, put it back into service. If the error code recurs, replace the CMC module.
Error Code 3001600
Error Code: 3001600
Result: To show that the card staying inside ICRW was moved up to the point where status request information change, To show that card was inserted into the ICRW through rear side by external force
Error Code 365
Error Code 365: DISPENSER DEVICE NOT FOUND
Resolution:
1. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.
2. Clear the terminal error code. Replace the dispenser if the error persists.