1. Home
  2. Error Codes

Error Codes

RSS

Error Code 203

Error Code 203: SPED KEYPAD IS NOT REPLYING TO MAIN BOARD

Resolution:

1. Make sure all cables are seated securely at the SPED board and their other termination points.

2. Make sure the tamper screw is secure to the SPED Module. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.

3. Clear the error.

4. If the error persists, replace the SPED keypad module.

Error Code 2181600

Error Code 2181600

Result: Paper cutting error when it tries to auto load paper roll

Error Code 196

Error Code 196: CARD READER ERROR

Resolution: 

1. Inspect the card reader assembly. Make sure that there is no foreign material in the card slot.

2. Clean the card reader assembly with a cleaning card.

3. Make sure the ribbon cable from the docking station to the card reader is fastened at both ends of the cable and the orientation of the cable is correct.

4. If the error persists, replace the card reader.

Error Code 195

Error Code 195: RECEIPT PRINTER OUT OF PAPER

Resolution: 

1. Replenish the paper.

2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.

3. Clear the error.

4. Make sure that the ribbon cable from the docking station to the low paper sensor assembly is fastened at both ends of the cable and the orientation of the cable is correct.

5. If the error persists, possible causes of the problem may be the low paper sensor assembly, the docking station, the main board, or cables.