1. Home
  2. Error Codes

Error Codes

RSS

Error Code 186

Error Code 186: BILL SIZE NOT CONFIGURED

Resolution:

This value is factory defaulted to $0.00. Allowable bill sizes are 5, 10, 20, 50, and 100. Enter the Management Functions and configure the bill size.

Error Code 2181400

Error Code 2181400

Result: No paper is found at paper detecting sensor, SS5 within proper time interval when it tries to auto load receipt paper roll

Error Code 205

Error Code 205: SPED KEYPAD REPORTED TAMPER CONDITION

Resolution: 

1. Status valid only for units with SPED keypad device installed. Make sure the battery is seated securely in the battery holder. Make sure the tamper screw is secured to the SPED module.

2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.

3. Clear the error. If the error persists, replace the SPED keypad module.

Need a new keypad? Check out these ATM keypads for sale

Error Code 2181700

Error Code 2181700

Result: Paper cut retraction error when it tries to auto load paper roll