Error Code 350
Error Code 350: JAM IN NOTE STACKER
Resolution:
1. Inspect for and clear any jammed notes that are found in the note stacker.
2. Clean all sensors as needed.
3. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.
4. Perform several Test Dispenses. If the error persists, it may be necessary to replace the note stacker or the CMC module.